<var id="vp51j"></var>
<var id="vp51j"><strike id="vp51j"></strike></var><var id="vp51j"><strike id="vp51j"><listing id="vp51j"></listing></strike></var>
<var id="vp51j"></var>
<menuitem id="vp51j"><strike id="vp51j"></strike></menuitem><var id="vp51j"><strike id="vp51j"></strike></var><var id="vp51j"></var><var id="vp51j"></var>
<menuitem id="vp51j"></menuitem><var id="vp51j"></var>
<var id="vp51j"></var>
<var id="vp51j"><strike id="vp51j"></strike></var>
<var id="vp51j"><dl id="vp51j"></dl></var>
   
 
Home >> Product Manual Show >> Belt Filter Press System

Universal Type Belt Filter Press

 

Universal Type Belt Filter Press
●(1) The technical parameters of universal type belt filter press
Type  
Belt width 
Belt Speed   Mechanical governors 
Motor Power
Gravity Dehydration Length   
Belt Length
Reference Processing Capacity
Machine Net Weight
Exfactory Price(Ten thousand RMB)
*Whether the solid content is less or more than 3 percent, the aforementioned processing capacity  is always calculated by the 3 percent of solid content in feeding.

●(2) The material specifications of universal type belt filter press
A.General requirements
The frame resists corrosion by hot dipped galvanished carbon steel with spraying epoxy resin paint. (If you choose stainless steel 304L, should give a special indication.)
Stress roller and roller heads apply middle carbon alloy steel.
Dewatering rollers apply stainless steel 304L.
Rollers apply carbon steel with covering rubber.
Driving rollers, tensioning rollers and correcting rollers apply carbon steel with covering rubber.
Filter liquor collecting pan and washing device apply stainless steel 304L.

B.Special requirement:
The machine is manufactured according to the environmental conditions and requirements of client

●(3) The application specifications of universal type belt filter press:
 Small and medium-sized municipal sewage treatment plant
Organic sludge from industrial wastewater treatment
 Fine-grained inorganic sludge from industrial wastewater treatment

●(4) The machine model features of universal type belt filter press
Small volume, light weight     
Single electric motor, single drive roller and mechanical speed governors 
Open type bearing chock 
Gravity dehydration length is 1600mm.

●(5) Outside dimensions and mounting dimensions of universal type belt filter press
sludge outlet
windpipe access
upper washing pipe
lower washing pipe
expansion bolt
embedded PVC pipe
A-A section plane
Type
Note:  Facing to sludge outlet, electric motor and washing pipe are on the left and air control box is on the right.



 
Back
Guangdong Xinhuan Environmental Industry Group Co.,Ltd    ICP09018257     Powerd By :www.ni8.com   
   Guestbook   Contact    E-mail Login   
 
500彩票导师网址